Language
                                      Chinese   English
                                      Telephone
                                      8615324961622
                                      1.Introduction of yeast dryer
                                      JHD type drum yeast dryer is a single cylinder dryer, can be used for drying of various kinds of slurry, especially for recovery of the waste yeasts in brewhouse, dryers of different specifications can meet the production demand of brewhouses at the scale of annual 30,000 tons to 100,000 tons of beer. This machine is also suitable for the drying treatment in food, chemical and medicine, etc.
                                      2. Mechanical structure and operating principle
                                      JHD type drum yeast dryer body mainly consists of dryer cylinder, frame, driving system, scraper, limited material, scraping device, leaching material device and steam-path system. In addition, it is equipped with electrical control cabinet and exhaust steam cover. This is a kind dryer that heats the material and evaporates the moisture by indirect heating of steam. Its dryer cylinder ( drum) is a metallic hollow cylinder whose surface is finished and is extremely smooth, driven by the transmission device (gearwheel and pinion), the dryer cylinder rotates in axial direction and the speed can is adjustable. The slurry is preheated in preheating tank, when heated to about 50℃, the slurry will be pumped to the leaching material tank at lower part of the drying cylinder, the drying cylinder submerges about 60-80mm depth, then the surface of the rotary cylinder will be coated with a layer of uniform slurry (the thickness of the film), the steam pressure in the dryer cylinder is 0.15-0.3 Mpa, the slurry is heated on the outside surface of the dryer cylinder, the moisture be exhausted by induced draft fan after evaporation. The drying will be finished when the dryer cylinder rotates one circle, the material piece on the external surface of the dry cylinder is scraped with scraping device and falls to the discharge port for collection.
                                      3.Main characteristic and performance
                                      The dryer cylinder in contact with the material is made of high grade cast iron subject to ground finishing, with characteristics of anticorrosion and free pollution. This machine adopts conductive heating, there's no heat loss taken by the drying medium, so it is high heat utilization and low energy consumption, usually above 70%. It is also characterized by compact structure, less room taking and convenient cooperation and maintenance, etc. This machine is made by combining with the advantages of the Germany sample machine and in light of the actual situation in China, advanced operational performance is achieved.

                                      The factors that influence the performance of the machine are as follow:
                                      (1)Steam pressure(0.1-0.4Mpa)or the temperature of the heating medium
                                      (2)Rotating speed(4~10r/min)
                                      (3)The thickness of the film(that is the thickness of the material attaching on the surface of the dryer cylinder)
                                      (4)The characteristic of the material(such as the content, fluid and temperature of the solid matter)

                                      Technical Parameter

                                      Model Capacity(kg/h) Evaporation Capacity(kg/h) Initial Moisture(%) Final Moisture (%) Steam Working Pressure Total Powe(kw) Area(㎡)
                                      Φ1.5m×2m 50-60 140-168 80-89% ≤9% 0.25-0.3Mpa 6.97 4.5m×2m
                                      Φ1.5m×2.35m 60-70 168-196 80-89% ≤9% 0.25-0.3Mpa 9.37 5m×2m
                                      Φ2m×2.5m 70-90 196-260 80-89% ≤9% 0.25-0.3Mpa 13.7 5.5m×2.5m
                                      Φ2m×3m 90-110 260-310 80-89% ≤9% 0.25-0.3Mpa 17.7 6m×2.5m
                                      Φ2.5m×3m 110-130 310-365 80-89% ≤9% 0.25-0.3Mpa 17.7 6m×3m
                                      Φ2.5m×4m 130-160 365-450 80-89% ≤9% 0.25-0.3Mpa 22 7m×3m

                                      More

                                      More cases

                                      Online MessageGet the complete dryer production line quotation for free

                                      quick response and give consultation answers Custom production line for you,
                                      NAME*
                                      TEL*
                                      Message
                                      reply within 30 minutes
                                      Design production plan
                                      Message consultation
                                      Click to communicate
                                      Online chating
                                      Zhengzhou Dingli New Energy Technology Co., Ltd 豫ICP備14018430號
                                      亚洲欧洲日产国码无码_一区二区三级片亚洲_国产免费无遮挡18禁日韩_暖暖日本高清中文